Kenann Engineering (M) Sdn Bhd

  • About Us
    • Introduction
    • Key Personnel
    • Vision and Mission
    • Commitment To Excellence
    • Certificates
  • Products
    • Penstocks
    • River Gates
      • Radial Gate
      • Roller Gate
      • Miter Gate
      • Tilting Gate
      • FLap Gate / Fish Belly Gate
      • Stoplogs and Lifting Beams
    • Portable Actuators
  • Services
    • Design & Fabrication
    • Installation & Service
    • Training, Testing & Commissioning
  • References
  • Gallery
  • Contact Us
    • Our Representatives / Agents
    • Enquiry Form

FLap Gate / Fish Belly Gate

Figure 5 Fish Belly Gate 3D CAD modelling
Figure 6 Fish Belly Gate.

Introduction

Consists of a straight or curved retaining surface, pivoted on a fixed axis at the sill. The design of the fish belly gate leaf can be operated from one end for spans up to 20m, since the closed shell structure offers high resistance against torsion. The bearings are rigidly anchored to the sill and spaced from 2.5m to 4m.

Description

The gate makes an angle from 60 to 70 degrees with the horizontal when it is fully open position. During fully closed position, the skin plate forms a continuous surface with the weir bottom, presenting no obstacles to the water flow.

Contact Us

Kenann Engineering (M) Sdn Bhd
C-06-21 The Scott Garden,
289, Jalan Klang Lama,
58100 Kuala Lumpur,
Malaysia.

Tel : +603-7971 8632

Fax : +603-7972 8631

Email : info@kenann.com.my

Copyright © 2025 · created by gen1one.com · Log in